Bosch FPD‑7024 Fire

Bosch FPD7024 Fire Alarm Control Panels

Four initiating zones (expandable to eight); up to 20 two wire smoke detectors per zone, Programmable through front panel interface, remote FMR7033 Liquidcrystal Display (LCD) keypads, or remote programming software (RPS) through a DX4010V2 serial interface, Expandable for programming or reporting with Ethernet or cellular IP connectors (DX4020, ITS-DX4020-G, B420, B426, or B450/B44x), Two notification appliance circuits.

  • Current (alarm)*: 380 mA
  • Current (standby)*: 200 mA
  • Power (primary) : 120 VAC , 1.2 A maximum, 60 Hz or240 VAC , 0.75 A maximum, 50 Hz
  • * For product specific current values, see the product Installation Instructions.
  • Environment: Indoor, dry
  • Relative Humidity: Up to 95%, non-condensing
  • Temperature (operating): +32°F (0°C) to +120°F ( +49°C)
  • Color: Red
  • Dimensions (HxWxD): 20.8 in. x 15 in. x 4.3 in. (52.8 cm x 38.1 cm x 10.9 cm)
  • Material: Cold-rolled steelBase: 18 gauge (1.2 mm)Cover: 19 gauge (1.1 mm)
  • Current: 44 mA maximum per loop
  • Line resistance: 150
  • Voltage: 24 VDC nominal
  • NAC: 24 VDC nominal, 4 A maximum
  • On-board Relays: Three Form C contacts rated at 5 A, 28 VDC